Christine Conner？created this Holiday？Card Holder？especially for you! Download the free embroidery designs to make the appliqué and create the quiting， and stitch a？lovely wall hanging using？your favorite colored fabrics and threads.
I have always wanted a festive place to put my Christmas？Cards. I have also been getting lots of requests for feather quilting designs for my？Edge-to-Edge quilting products， so I thought it would be fun to combine appliqué with custom feather quilting!rustic pillow covers
This will be a 2 part series. In the first part， you？will appliqué and assemble the card wall hanging. In the second part， I will show you how to use my designs to create custom quilting to complete your wall hanging.
These are large files， intended for large hoops like the Maxi and Jumbo Hoops. If your embroidery system doesn’t have the ability to stitch a large design in one hooping， there are Embroidery Software programs available that offer the option to split a design. The BERNINA Embroidery Software 8 –； DesignerPlus is one available program. Check with your local BERNINA store？to find out more information.
Now， let’s get started!
From Background Fabric cut：？Four 16″； x 21″； rectangles for Letters and Pine Cone Blocksanniversary gifts for couples， and one 8.5″； x 10″； for bottom of wall hanging behind the pine cone pocket.
From Letter Fabric， cut？three 6″； x 9″； rectangles.
From Binding Fabric， cut？three 2.5″； x width of fabric strips.
Download the Embroidery Files： JOY Cardholder Appliqué Designs
You will use the following embroidery files：
Where ### is the extension of the file format for your embroidery machine.
Step 1：？Making the J Block Stabilize a？ 21″； x 16″； background fabric with tear-away stabilizer.？Hoop the fabric.？Load the JDesign.### into your machine.？Thread your machine with a neutral colored thread.？Start the machine.？The machine will stitch first a basting rectangle， and then the placement line.
TIP： Basting lines are important for trimming.
Step 2 When the machine stops， place the 6″； x 9″； letter fabric over the placement line.？Use painter’s tape to hold the fabric in place.
Step 3 Start the machine.？The machine will tack the fabric in place.
Step 4 When the machine stops， remove the hoop from the machine， but leave the fabric in the hoop.？Lay the hoop on a flat surface and trim away the excess fabric. Trim close to the stitches， but don’t cut through the stitches.
Step 5 Return the hoop to the machine.？Place gold thread in the machine， or the thread color you would like for the scrolls and dots inside the letter.？Start the machine.？The machine will stitch the scrolls and dots that are on the letter.
Step 6 Change the thread color to the color you would like for the satin edge.？Start the machine.？The machine will satin stitch around the letter.？When the machine stops， remove the letter from the hoop， and set aside.？Trim 1/2″； past the basting line. The piece will be？？8.5″； x 10″； when finished. Remove basting stitches.
Step 7 Repeat steps 1-6 for both the ODesign.### and the YDesign.###
TIP： When I cut out the center of the O， I slide a ripper between the top layer of fabric and the bottom layer of fabric to start a small hole. Then， I finish trimming with my scissors.
Step 8 Making the Pine Cone Pocket The Pocket has appliqué and quilting， so you will want to hoop the stabilizer， the 16″； x 21″； square of batting， and then the 16″； x 21″； square of background fabric.
Put？the？hoop in the machine.？Load the PineDesign.### file into your machine. Thread the machine with the color you want for the pine cone branch.？Start the machine.？The machine will stitch the basting line， and then the branch.
Step 9 Start the machine again.？The machine will stitch a placement line for the left pine cone.
Step 10 When the machine stops， place the pine cone fabric over the placement lines.？Tape to hold in place.？Start the machine.？The machine will tack stitch the fabric in place.
Step 11 When the machine stops， remove the hoop from the machine， but do not remove the project from the hoop.？Lay the hoop on a flat surface， and trim away the excess fabric.？Return the hoop to the machine.？Repeat steps 9-11 for the right pine cone， and then continue with step 12.
Step 12 Change the thread to white.？Start the machine.？The machine will stitch the snow on the pine cones.
TIP： It is fun to use an iridescent thread for the snow. Sadly， it doesn’t photograph well， but it looks really pretty when you see it in person.
Step 13 Change the thread to brown for the pine cones.？Start the machine.？The machine will stitch the satin detail on first the left pine cone.？Start the machine again， and it will stitch the detail on the right pine cone.
Step 14 Change the thread to green.？Start the machine.？The machine will stitch the pine needles.
Step 15 Change the thread to match your background fabric.？You may want to change your bobbin to match as well.？Start the machine.？The machine will stitch quilting around the pine cone design.
Step 16 Remove the stitch out from the hoop.？Trim the pocket 1/2″； past the basting stitches.
Step 17： Making the Pocket Back Flip the block over， and trim away the stabilizer from the basting line to the edge of the pocket block.？The rest of the stabilizer can stay.？Remove the basting stitches.
Step 18 Place the 8.5” x 10.5” pocket back fabric and the pine cone pocket right sides together.？Sew a 1/4″； seam along the top edge.？Fold the backing fabric over the back side of the pocket. Press.
Note： I folded up the left corner so you can see how the backing fabric will be even with the bottom of the pocket， yet there will be a 1/4″； edge of the backing fabric showing at the top.
Step 19： Joining the Blocks Using the slide on seam guide (one of my favorite gadgets)， attach the J，O， and Y blocks vertically together using a 1/2″； seam， so they spell JOY!
Attach the 8.5″； x 10″； background rectangle with a 1/2″； seam allowance below the Y block. This will be where the pocket will be placed later.？Now， your project is ready for custom quilting in Part 2 of the tutorial!
Today’s gift is the download of the？JOY Holiday Card Holder Appliqué Designs？for all our awesome WeAllSew fans.
I designed this knotted top to be a versatile piece I could transition from beach/pool cover-up to day and night. It’s an easy-to-wear silhouette that can be worn for many occasions. Follow the simple tutorial below to make your own.
Yes, bookcases are utilitarian by providing much-needed storage, but they also add a major style statement to any room. They’re the perfect solution to a blank wall, lending a sense of height and space. And with your own artful arrangement, you get to add your stamp of personality. Check out our images and tips below to achieve a well-styled bookcase at home.